Carbon Steel Pipe Schedule Chart Dimension -- ASME B36.10M-2004

Welded and Seamless  Wrought Steel Pipe–Steel Pipe Schedule Chart

-ASME B36.10M-2004

CONTENTS

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

3 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

4 Wall Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5 Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

6 Permissible Variations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

7 Pipe Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

8 Wall Thickness Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

9 Wall Thickness Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table

1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe . . . . . . . . . . . . . . . 3

1. Scope

This Standard covers the standardization of dimensions of welded and seamless wrought steel pipe for high or low temperatures and pressures. 

The word pipe is used, as distinguished from tube, to apply to tubular products of dimensions commonly use for pipeline and piping systems. Pipe NPS 12 (DN 300) and smaller have outside diameters numerically larger than their corresponding sizes. In contrast, the outside diameters of tubes are numerically identical to the size number for all sizes.

2. Size

The size of all pipe is identified by the nominal pipe size.The manufacture of pipe NPS 1⁄8 (DN 6) to NPS 12

(DN 300), inclusive, is based on a standardized outside diameter (OD). This OD was originally selected so that pipe with a standard OD and having a wall thickness that was typical of the period would have an inside diameter (ID) approximately equal to the nominal size. Although there is no such relation between the existing standard thickness — OD and nominal size — these nominal sizes and standard ODs continue in use as ‘‘standard.’’ The manufacture of pipe NPS 14 (DN 350) and larger proceeds on the basis of an OD corresponding to the nominal size.

API 5L Line Pipe 8 inch SCH 40 ERW Welded Steel Tube

API 5L Line Pipe 8 inch SCH 40 Welded Tube

O.D	O.D tolerance	W.T tolerance
1/2"-26"	±0.03	±10%
Length	3--18M , according to customers' requirements
International Standard	ISO 9001;2000 API 5L, ASTM A53, A252, EN10219,  GB  etc.
Standard	ASTM A53 A106  / BS 1387-1985 GB5310-1995 API 5L
Material	Q235/Q345 GR.B X42 X46 X52 X60 X65 X70 X80, GRADE 1, GRADE 2, GRADE 3
Product  Usage	8 inch SCH 40 Welded Tube Fluid pipe, boiler ,hydraulic, gas,oil,chemical fertilizer, structure pipes etc. 1.For low pressure liquid delivery such as water , gas and oil 8 inch SCH 40 Welded Tube 2.For construction , example:  building greenhouse
Making method	cold drawing,hot rolling,hot expanded
Packing	Bevelled ends /plain ends , varnish coating, marking, plastic caps for end protecting ,pacing In bundles according to customers' requirements
Main market:	Middle east, Africa, North and South America, East and West Europe, South ,southeast Asia, Australia and so on
Place of Origin	Hebei, China
Productivity	10000 Ton/Month
Processing technology available:	Threading , coupling and with plastic caps protected
Remarks	1) Payment : TT, LC etc 2) Trade Terms : FOB / CFR /CIF 3) MOQ : 25T  4) Delivery period: accordin to the material ,the standard, and the quanitty of the contract.(will be informed in the quotation sheet)

Bri-Chem Sells All Steel Pipe Division Assets

Bri-Chem Corp., a leading North American wholesale distributor and manufacturer of oil and gas drilling fluids, is pleased to announce that it has completed the sale of its Steel Pipe Manufacturing division and Steel Pipe Distribution division including their respective assets and ongoing business operations to a U.S.-based steel company. Bri-Chem will not retain any steel pipe assets or conduct any further steel pipe business operations going forward. The sale transaction provides Bri-Chem the opportunity to further its North American drilling fluids growth strategy by expanding its leadership position in existing markets and penetrating future growth into new drilling fluid market segments.

"Bri-Chem's USA drilling fluids expansion success has led to an overabundance of opportunities and this divestiture will position our company to deliver focused organic and acquisitive growth on a sustainable basis," said Don Caron, Chief Executive Officer of Bri-Chem. "We do not believe that the value of our North American leading wholesale drilling fluids market position is being adequately reflected in our stock price. By monetizing the steel pipe assets, we will be able to unleash the growth potential that resides within our market leading drilling fluids markets."

Bri-Chem Sells All Steel Pipe Division Assets

Source from http://www.hysteelpipe.com/bri-chem-sells-steel-pipe-division-assets/

ASTM A53 B ERW Steel Tubing

ASTM A53 B ERW Steel Tubing, as the HYSP most popular product, is manufactured as per ASTM A53 B ERW standard which covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN6 to DN 650].

Under this standard, there are many test needed to be done to ensure the quality of ASTM A53 B ERW Steel Tubing.

ASTM A53 B ERW Product Analysis

The purchaser is permitted to perform an analysis of two ASTM A53 B ERW Steel Tubing from each lot of 500 lengths, or fraction thereof. Samples for chemical analysis, except for spectrographic analysis, shall be taken in accordance with Practice E 1806. The ASTM A53 B ERW Steel Tubing chemical composition thus determined shall conform to the requirements given in Table 1 as above.

Mechanical Properties

Tension Test

Bend Test

If ordered for close coiling, the ASTM A53 B ERW Steel Tubing shall stand being bent cold through 180° around a cylindrical mandrel, the diameter of which is eight times the specified outside diameter of the ASTM A53 B ERW Steel Tubing, without failure.

Flattening Test

The flattening test shall be made on welded pipe over NPS 2 [DN 50] in extra-strong weight or lighter.

Seamless Pipe:

Although testing is not required, ASTM A53 ERW Steel Tubing shall be capable of meeting the flattening test requirements of Supplementary Requirement S1, if tested.

Electric-Resistance-Welded Pipe:

A test specimen at least 4 in. [100 mm] in length shall be flattened cold between parallel plates in three steps, with the weld located either 0° or 90° from the line of direction of force as required by 7.3.3.2 or 7.3.3.3, whichever is applicable.

ASTM A53 B ERW PIPE

Hydrostatic Test

The hydrostatic test shall be applied, without leakage through the weld seam or the ASTM A53 B ERW Steel Tubing body.

Plain-end ASTM A53 B ERW Steel Tubing shall be hydrostatically tested to the applicable pressure given in Table X2.2, and threaded-andcoupledASTM A53 B ERW Steel Tubing shall be hydrostatically tested to the applicable pressure.

Nondestructive Electric Test

The weld seam of each length of electric-resistancewelded ASTM A53 ERW Steel Tubing NPS 2 [DN 50] or larger shall be tested with a nondestructive electric test in accordance with Practices E 213, E 273.

ASTM A53 B ERW Steel Tubing Specification

Product Name	ASTM A53 B ERW Steel Tubing
Diameter	1inch – 26inch
Wall Thickness	SCH10,SCH20,SCH30,STD,SCH40, SCH 80 etc
Length	Random length from 3m to 18m
Pipe Standard	ASTM A53, A106, API 5L,ASTM A500, EN10219, EN10210 etc
Steel Grade	GR A, GR B, X42, X52, S275J0H, S275JRH, S275J2H, S355J0H, S355JRH,
Test	Hydro test, UT test, Flatten test, Impact test etc
Application	industrial pipes, structure steel tube, system pipe, piling tube,
Pipe Coating	Black painting, varnish paint, anti rust oil, or other coating required
Package	Plastic caps on both ends, Steel bundle, or acc. to customers’ request
Inspection	ISO9001, SGS,BV, GL  or other TPI appointed by customer
Capacity	10000 metric tons per month
Delivery time	30 days against deposit or LC at sight

S355J0H Structure Steel Pipe

S355J0H Structure Steel Pipe

HYSP not only produce API 5L GRADE B ERW Steel Pipe, we also produce S355J0H Structure Steel Pipe as per EN10219, EN10217, EN10210 standards. 

S355J0H Structure Steel Pipe

S355J0H Structure Steel Pipe is widely used as structure steel pipe, construction steel pipe, bridge pipe or some other enginnering pipes. The following is S355J0H Structure Steel Pipe specifications:

Product Name	S355J0H Structure Steel Pipe
Diameter	1 inch - 26 inch
Wall Thickness	SCH 10,SCH 20,SCH 30,STD,SCH 40
Length	Random length from 3m to 12m
Pipe Standard	EN10219, EN10210, ASTM A53, A106, API 5L
Steel Grade	S355J0H, S355JRH, S355J2H, S275J0H, S275JRH, S275J2H,
Test	UT test, Flatten test, Impact test etc
Application	Structure steel tube, common use pipe, piling tube,
Pipe Coating	Black painting, varnish paint, anti rust oil, or other coating required
Package	Plastic caps on both ends, Steel bundle, or acc. to customers' request
Inspection	ISO9001, SGS,BV, GL  or other TPI appointed by customer
Capacity	10000 metric tons per month
Delivery time	30 days against deposit or LC at sight

API 5L SPEC for Line Pipe (6) - Delivery condition

API 5L SPEC Delivery condition

For each order item, the delivery condition for PSL 1 pipes shall be at the option of the manufacturer unless a specific delivery condition is specified in the purchase order. Delivery conditions shall be as given in API 5L 44th Tables 1 and 3.

For PSL 2 pipes, the delivery condition shall be in accordance with the purchase order as specified in the steel name. 

PSL	Delivery condition	Pipe grade/steel gradea,b
PSL 1	As-rolled, normalizing rolled, normalized or normalizing formed	L175 or A25
		L175P or A25P
		L210 or A
	As-rolled, normalizing rolled, thermomechanical rolled, thermomechanical formed, normalizing formed, normalized, normalized and tempered; or, if agreed, quenched and tempered for SMLS pipe only	L245 or B
	As-rolled, normalizing rolled, thermomechanical rolled, thermomechanical formed, normalizing formed, normalized, normalized and tempered or quenched and tempered	L290 or X42
		L320 or X46
		L360 or X52
		L390 or X56
		L415 or X60
		L450 or X65
		L485 or X70
PSL 2	As-rolled	L245R or BR
		L290R or X42R
	Normalizing rolled, normalizing formed, normalized or normalized and tempered	L245N or BN
		L290N or X42N
		L320N or X46N
		L360N or X52N
		L390N or X56N
		L415N or X60N
	Quenched and tempered	L245Q or BQ
		L290Q or X42Q
		L320Q or X46Q
		L360Q or X52Q
		L390Q or X56Q
		L415Q or X60Q
		L450Q or X65Q
		L485Q or X70Q
		L555Q or X80Q
	Thermomechanical rolled or thermomechanical formed	L245M or BM
		L290M or X42M
		L320M or X46M
		L360M or X52M
		L390M or X56M
		L415M or X60M
		L450M or X65M
		L485M or X70M
		L555M or X80M
	Thermomechanical rolled	L625M or X90M
		L690M or X100M
		L830M or X120M
a For intermediate grades, the steel grades shall be as agreed, but consistent with the above format.
b The suffix (R, N, Q or M) for PSL 2 grades belongs to the steel grade.

Source : http://www.hysteelpipe.com/portfolio/api-5l-spec-line-pipe-6-delivery-condition/